Challenge: A Medical device customer needed to rapidly changeover between a family of Nitinol guidewires having various lengths and geometries. Since the geometry of the components varied in length, the customer needed to change tooling over frequently, a process that can take up to 4 hours. Also, rapidly removing over 30% of the the material as it thrufeeds into the machine accelerated tool wear on the existing system and as tooling degrades, dimensional integrity suffers.
Solution
Using the GT-9AC micro grinder with a high speed vision tracking device to maintain length accuracy on the fly in real time as the wire is being ground, the system is able to process much faster than the previous system, while reducing pressure on the tooling. Operating as a profile grinder, one grinding wheel configuration is used for the complete family of parts so changeover between SKU’s is as simple as selecting a part profile from a library on the touchscreen HMI. Changeover is reduced to 3-5 minutes. In addition, the machine is also configured with an acoustic emissions sensor device to reduce operator intervention in setup increasing the reliability and longevity of the setup when tooling is replaced. This reduces the initial setup to 30 minutes. Ultimately 10 different wire configurations were run using one setup with less than 5 minutes to changeover between configurations.
Explore | GT-9AC Micro Grinding Machines
GT-9AC
The GT-9AC is designed to grind medical guidewires with multiple tapers, paddles, and even parabolic shapes, with the ability to update the linear position of the wire every 0.00025″ (0.006 mm) at grinding speeds superior to traditional centerless grinding.
