Challenge: To grind two mating metal components, with a tight clearance requirement between their surfaces, to create a powered arthroscopic shaver used in orthopaedic joint surgeries.
Solution
In this application, two tubes are assembled, with as minimum a gap between the two parts as possible ‐sometimes as small as 0.0005” ‐so that the inner tube moves freely inside the outer tube without allowing debris to get caught between the surfaces. The tips of the tubes typically have a rounded guiding surface, and the outer tube has a window cut in it to expose the sharp edges of the inner tube, both difficult to manufacture in volume.
For the outer sleeve, a GT‐610 thrufeed grinder is used to grind the OD of the blank tubes, maintaining a surface finish between 3‐6 RMS and maintaining a comfortable 2‐3 Cpk on the outside diameter of the part. Material removal of 0.005” with a tolerance requirement of +/‐ 0.0005” was met easily in a fully automated turnkey process.
To infeed grind the shape of the inner tube, using the Glebar GT‐610‐CNC, Glebar was able to maintain a +/‐ 0.0002” tolerance on the tip dimensions. View full GT-610-CNC Case Study and Video.
3-6 RMS surface finish maintained
2-3 Cpk outside diameter maintained
Material removal of 0.005″ met
Tolerance requirement of +/- 0.0005″ met
Explore | GT-610 Infeed/Thrufeed Centerless Grinding Machines
GT-610
The GT-610 Automated Infeed/Thrufeed Centerless Grinding Machine can be custom fitted with automation. This system is the ideal option for when infeed applications do not require a CNC dresser and for the vast majority of thrufeed applications. The GT-610 excels at hard metals and composites, producing carbide blanks, spools, bushings, and engine components such as automotive fasteners and valve lifters. It can also effectively size down metal bars.
